Supply glass lens series vacuum optical coating machine
This series of coating machine is especially suitable for optical lens, electronic products, acrylic, glass, lamps, mobile phone windows, glasses, stage lighting, etc., can be coated with anti-reflection film, filter, illusion, red multicolored, red, yellow, green , blue and other colorful colors.
Supply glass lens series vacuum optical coating machine
This series of coating machine is especially suitable for optical lens, electronic products, acrylic, glass, lamps, mobile phone windows, glasses, stage lighting, etc., can be coated with anti-reflection film, filter, illusion, red multicolored, red, yellow, green , blue and other colorful colors.
●E-type electron gun is suitable for stable plating from several layers to dozens of layers
●Adopt advanced high-power Hall ion source and RF source
●Multi-functional workpiece transmission (with arched or planetary rotating frame)
●Inficon or Maxtek quartz crystal film thickness monitoring system (constant evaporation rate and automatic film thickness monitoring)
The coating layer of this machine is non-toxic, does not harm the human body, does not pollute the environment, and can completely replace the traditional water plating with serious pollution.
JYG series vacuum optical coating machine model and calculation parameters | |||
Performance | JYG-0810 | JYG-1213 | JYG-1315 |
Coating chamber size | Ф800×H1000mm | Ф1200×H1300mm | Ф1300×H1500mm |
source of ion | Power 2KW, anode current up to 6A. Double filament (automatic switching) improves adhesion, film density, and stable refractive index. (Hall source) | ||
Vacuum chamber structure | Vertical front door opening, horizontal front opening door, rear vacuum system | ||
Vacuum chamber material | Fully high quality (304 stainless steel) stainless steel. | ||
Ultimate vacuum | 8.0X10-4Pa | ||
Pumping time | Pumped from the atmosphere to 8.0×10-3Pa≤16 minutes (no load) | ||
Vacuum acquisition system | Slide valve pump (rotary vane pump) + Roots pump + diffusion pump + maintenance pump (or optional: molecular pump, cryogenic pump, cryogenic system) (specific models can be configured according to customer requirements) | ||
Heating system | Heating on the heating pipe, PID control, maximum temperature 350 degrees | ||
Electron gun type | The electronic gun has three round cymbals and a U-shaped cymbal. The high voltage 4KV-8KV is adjustable, and the triangle wave, sine wave and square wave scanning electric positioning can be freely selected. | ||
Resistance evaporation source | 2 sets of resistance evaporation sources | ||
Coating type | Optical anti-reflection film, anti-reflection film (AR), broadband anti-reflection, single-point anti-reflection, cut-off filter, colorful decorative functional film, etc. | ||
Workpiece turret Rotation mode |
Arch type single piece revolving, three workpiece disc planetary revolution, frequency control (controllable adjustable) | ||
Process gas | 2-way process gas flow control and display system Optional automatic gas filling system | ||
cooling method | The water circulation cooling method requires a cooling tower or an industrial chiller or a deep cooling system. (provided by the customer) | ||
control method | Manual/automatic integration, touch screen operation, PLC or computer control | ||
Film thickness monitor | The US imported film thickness meter SQC-310 and PLC form a fully automatic control vacuum pumping and electron beam automatic evaporation system to realize automatic control of equipment. | ||
Alarm and protection | Alarms such as water shortage, over-current over-voltage, and open circuit such as pumps and targets are alarmed, and corresponding protective measures and electrical interlocking functions are implemented. | ||
Equipment footprint | W2m×L3m | W3m×L4m | W4.5m×L6m |
Other technical parameters | Water pressure ≥0.2MPa, water temperature ≤25°C, air pressure 0.5-0.8MPa | ||
Other models | We can design a special coating machine for the products according to customer needs. |